...
Service Name | Port Number | Transport Protocol | Reference | Notes |
---|---|---|---|---|
cwmp | 7547 | tcp | TR-069 | ACS and Connection Request URLs can use this port |
cwmp | 7547 | udp | TR-069 | UDP Connection Request URL can use this port (it's the default) |
Service Names
The following Service Names (without ports) were registered by BBF and are listed in the IANA Service Name and Transport Protocol Port Number Registry. Additional links are provided here to identify references for use of these Services Names, and defined TXT parameters associated with them.
Service Name | Transport Protocol | Published Reference or Current Project | TXT Parameters |
---|---|---|---|
usp-agt-coap | udp | USP Project | path=<resource path> port=<TCP or UDP port number> name=<device or USP friendly name> code=<provisioning code> retry-min=< USP retry minimum wait interval> retry-mult=< USP retry interval multiplier> |
usp-agt-http | tcp | USP Project | |
usp-agt-stomp | tcp | USP Project | |
usp-ctr-coap | udp | USP Project | |
usp-ctr-http | tcp | USP Project | |
usp-ctr-stomp | tcp | USP Project |
URN Namespaces
The urn:dslforum-org:, urn:broadband-forum-org: and urn:bbf: prefixes are being registered with IANA. See Uniform Resource Name (URN) Namespaces for Broadband Forum.
...
Sub-option | Usage | Reference | Notes |
---|---|---|---|
1-4 | ACS discovery | TR-069 Section 3.1 | Sub-option usage:
|
5-6 | Reserved | TR-069 | Reserved because they were used prior to TR-069 Amendment 5, and because they're assigned as DHCPv4 option 125 sub-options |
7-10 | Unassigned | ||
11-16 | Device / Gateway association | TR-069 Annex F | Sub-option usage:
Sub-options 1-6 were used prior to TR-069 Amendment 5 |
17-20 | Unassigned | ||
21 | Reserved | TR-317 | Reserved because it's assigned as a DHCPv4 option 125 sub-option |
22-23 | GRE tunneling | TR-317 Section 7.1.3.3.2 | Sub-option usage:
|
24 | Reserved | TR-317 | Reserved because it's assigned as a DHCPv4 option 125 sub-option |
25-65534 | Unassigned |
RADIUS Attributes
Note |
---|
TBD |
path=<resource path>
port=<TCP or UDP port number>
name=<device or USP friendly name>
code=<provisioning code>
retry-min=< USP retry minimum wait interval>
retry-mult=< USP retry interval multiplier>