...
MoCATM Access technology can be used to deliver gigabit and multi-gigabit services to the end-user in the scope of Fiber Extension (FTTep). It has been defined as one of the the available technologies in TR-419.
. MoCATM Access has been defined by the Multimedia over Coax Alliance (https://mocalliance.org).
...
This project specifies a performance test plan including performance requirements for application of MoCA Access technology in coaxial access scenarios. The focus is on the Physical layer and Traffic testing similar to how TR-380 (G.fast) and TR-476 (G.hn access) performance test plans are defined. This performance test plan will include test setup information, equipment configuration requirements, test procedures, and performance requirements for each test case. Traffic tests show the throughput and delay for various packet sizes and mixes for the various use cases. This mix is called FASTMIX and has a predefined mix of IP packet sizes.
Frame Size (bytes) | Probability |
1566 | 0.050 |
1500 | 0.673 |
1024 | 0.088 |
256 | 0.014 |
70 | 0.175 |
Note: All Ethernet frame sizes being on the first byte of the Destination MAC Address and end on the last byte of the Frame Check Sequence (FCS). |
Table 1: FASTMIX Frame Size Distribution within Ethernet Traffic
...
The top level architecture and traffic configuration of the test platform covers both point-to-point (P2P) and point-to-multipoint (P2MP) test scenarios. In the P2MP scenario both the star and tap network are addressed.
Figure 1: P2P test setup
Figure 2: P2MP test setup
...