Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Stripped the editors column and removed the stale WT-473 project

Image Removed

Project Streams

User Services Platform

Multiexcerpt
MultiExcerptNameBUSUSPPS

Project Stream Page: User Services Platform Project Stream

Project Stream Leads: Barbara Stark Chen Li (AT&T) and Tim Spets (GreenWave SystemsNokia)

Description: The project stream handles the development, maintenance, and updating of the User Services Platform.


Multiexcerpt
MultiExcerptNameBUSUSPProjects


ProjectTitleDescriptionResourcesEditors
WT-369The User Services Platform

This document describes the architecture, protocol, and data model that builds an intelligent User Service Platform. It is targeted towards application developers, application service providers, CPE vendors, consumer electronics manufacturers, and broadband and mobile network providers who want to expand the value of the end users network connection and their connected devices.

The Data Model Schema and Data Model Objects for USP are developed in the BUS Data Modeling Project Stream (below).

Public Draft

Code Base

Issues

Specification

Bitbucket

Kanban Board

TBD

WT-479Framework for USP-Enabled DOCSIS DevicesShow how USP (TR-369) plus DOCSIS provisioning could do for Cable what TR-142 did for PON in terms of separating physical layer provisioning from higher “service” layer device management.Kanban BoardJohn Blackford (CommScope)

Jason Walls, QA Cafe

John Blackford, Arris


CWMP

Multiexcerpt
MultiExcerptNameBUSCWMPPS

Project Stream Page: TBD CWMP Project Stream

Project Stream Leads: John Blackford (Arris) and Klaus Wich (Huawei Technologies)None

Description: This project stream manages the development, maintenance, and updating of the CPE WAN Management Protocol, commonly known as TR-069.


Multiexcerpt
MultiExcerptNameBUSCWMPProjects


ProjectTitleDescriptionResourcesEditors

WT-069 Amendment 6

JIRA-CONTRIB

CPE WAN Management Protocol

This Working Text defines version 1.5 of the CPE WAN Management Protocol, incorporating Issues that have been promoted to accepted by the time of straw ballot.  It includes updates to the firmware management system, security updates, and updates to the XMPP connection request and notification mechanisms.

Code Base

Issues

Contributions

John Blackford, Arris

Klaus Wich, Huawei Technologie

Nothing being worked on at this time







BUS Data Modeling

Multiexcerpt
MultiExcerptNameBUSCWMPDMPS

Project Stream Page: TBD BUS Data Modeling Project Stream

Project Stream Leads: William Lupton (Broadband ForumMatthieu Anne (Orange) and Klaus Wich (Huawei TechnologiesDaniel Egger (Axiros)

Description: This project stream develops the schema and data model objects to manage connected devices using the CPE WAN Management Protocol and/or the User Services Platform. In addition it defines the data model schema and the necessary tool support.


Multiexcerpt
MultiExcerptNameBUSCWMPDMProjects


Issue 2 Amendment 12 (Device:2.12 for TR-069 Endpoints and USP AgentsTR Endpoints The publication includes an overview document and used when referencing the objects Code Base

Issues

Contributions

Steve Nicolai, Arris Amendment 8-Enabled Devices Agents  Amendment 8 Amendment 8 Amendment 8 CWMP models.  This description is both specific and detailed, allowing a Controller to know exactly what is supported by the device, including any vendor-specific objects and parameters.  Use of this Schema enhances interoperability and significantly eases the integration of new devices with a Controller.  USP uses a different mechanism for the same purpose.  That mechanism is specified in TR-369.VoiceService modelling is development version Code BaseIssuesSTBService modelling -- is development version Code BaseIssuesStorageService is development version Code BaseIssuesFAPService modelling is development version Code BaseIssues
ProjectTitleDescriptionResourcesEditors
WT-181 (DEV2DM)WT-181: Device Data Model

WT

-181 Issue 2 defines version 2 of the Device Data Model (Device:2) for TR-069

CPEs and USP Agents.

This includes XML files

that model interfaces, systems, and services in connected devices which is used to create a consumable HTML report.

In addition an explanatory document, written in in Markdown, exists and is provided as HTML document.

WT-181 Issue 2 Amendment 18 (2.18) is currently in progress.

Document

Bitbucket

Kanban Board

USP datamodel report

CWMP datamodel report

WT-106


(DMSUPP)

WT-106:

Data Model Template for CWMP

Endpoints and USP

Agents

WT-106

specifies data model guidelines to be followed by all CWMP Endpoints and USP Agents.  These guidelines include structural requirements for the data hierarchy, requirements for versioning of data models, and requirements for defining profiles.

In addition, WT-106

defines an XML Schema (the DM Schema) that as far as possible embodies these guidelines, and which is used for defining all CWMP and USP data models.  This makes data model definitions rigorous, and helps to reduce the danger that different implementations will interpret data model definitions in different ways.

WT-106

also defines an XML Schema (the DT Schema) that allows a device to describe its supported

data

model.

WT-106 Amendment 14 (1.14) is currently in progress.

Document

Bitbucket

Kanban Board


WT-104
(VOIPDM)
WT-104: Voice Service

Code Base

Issues

Contributions

WT-104 Data Model

WT-104 includes an overview document and XML files used for the VoiceService data model, used in

modeling VoIP service functions on a TR-069 Endpoint or USP Agent.

There

're currently no active

plans towards a new release of WT-104.

Bitbucket

Kanban Board

WT-135

(STBDM)

WT-135: Set Top Box Service Data Model

WT-135 includes an overview document and XML files used for the STBService data model, used in

modeling Set

Top

Box service functions on a TR-069 Endpoint or USP Agent.

There

're currently no active

plans towards a new release of WT-135.

Bitbucket

Kanban Board

WT-140
(NASDM)

WT-140: Storage Service Data Model

WT-140 includes an overview document and XML files used for the StorageService data model, used in modelling Network Attached Storage service functions on a TR-069 Endpoint or USP Agent.

There

're currently no active

plans towards a new release of WT-140.

Bitbucket

Kanban Board

WT-196
(FAPDM)
WT-196: Femto Access Point Service Data Model

WT-196 includes an overview document and XML files used for the FAPService data model, used in

modeling Femto Access Point (or Small Cell) service functions on a TR-069 Endpoint or USP Agent.

There

're currently no active

plans towards a new release of WT-196.

Bitbucket

Kanban Board

Wi-Fi In-Premises

Multiexcerpt
MultiExcerptNameBUSWiFiIPPS

Project Stream Page: Wi-Fi In-Premises Project Stream

Project Stream Leads: Barbara Stark (AT&T) and Tony Zeng (Huawei Technologies)

Description: This project stream exists to define requirements, test cases, and performance metrics for broadband user Wifi deployments in the home, in order to improve the end user experience and reduce operator support expenses.

Multiexcerpt
MultiExcerptNameBUSWiFiIPProjects
ProjectTitleDescriptionResourcesEditors

SD-398

Carrier Grade Wi-Fi - Study on Use Cases, Requirements, and Testing Procedures

The purpose of SD-398 is to collect the use cases and evolving requirements from operators regarding performance testing (to be performed prior to product selection by operators), analyze the existing documents from various SDOs and identify gaps in what they have documented, and identify potential test procedures and test profiles for Wi-Fi performance. This Study Document will enable discussions in that Project Stream prior to any decision to produce other work products such as Technical Reports, Test Plans, or formal cooperation with other standards bodies.

Contributions


WT-354
(DMR)
WT-354: Data Model Report Tool

WT-354 is the umbrella project for the CWMP and USP data model processing tool. There're two versions for the tool currently in use to process our data model reports.

This new version (written in Python) will be well-structured, maintainable, and will encourage collaborative development and will eventually fully replace the old tool (written in Perl).

Work towards the next release of the new report tool (2.2) is currently ongoing.

Old report tool release page

New report tool release page

Bitbucket

Kanban Board

WT-143
(PERMON) 

WT-143: Enabling Network Throughput Performance Tests and Statistical Monitoring

WT-143 outlines the theory of operations for Network Service Providers to initiate performance throughput tests and monitor data on  IP interfaces of  CPE and end-user networking devices using the mechanisms defined in TR-181 (the Device Data Model) and operated via the CPE WAN Management Protocol (TR-069) or the User Services Platform (TR-369).

Bitbucket (same as WT-181)

Kanban Board


Barbara Stark, AT&T

Tony Zeng, Huawei Technologies WT-398

Wi-Fi In-Premises Performance Testing

The primary goal of WT-398 is to provide a set of test cases and framework to verify the performance between AP (e.g., a CPE with Wi-Fi) and one or more STA (e.g., PC). The test cases are defined for a Device Under Test (DUT – AP only), tested against a or a set of STA. The DUT should not be a reference design and should contain the necessary system functionality to execute this test plan.CONTRIB

Tony Zeng, Huawei Technologies

Lincoln Lavoie, UNH-IOL

SD-401

Wi-Fi In-Premises Installation and Diagnostics

This SD-401 investigates the use cases and evolving requirements from service providers regarding tools they need to adequately onboard/install, diagnose and adjust deployed Wi-Fi networks and/or devices.

Contributions

Tim Carey, Nokia

Peter Silverman, ASSIA 

Network Measurement

Multiexcerpt
MultiExcerptNameBUSNMPS

Project Stream Page: TBD

Project Stream Leads: Barbara Stark (AT&T) and Marcos Martinez (MaxLinear)

Description: This project stream handles the interoperability of technologies used to measure in-home networks, including discovery and performance.

Multiexcerpt
MultiExcerptNameBUSNMProjects
ProjectTitleDescriptionResourcesEditors

WT-382

IEEE 1905.1 Reference Implementation

This Working Text defines a reference implementation of all mandatory and some optional parts of the 1905.1a profile version (defined in IEEE 1905.1a), ITU-T G.9977, and G.9979.

Code Base

Issues

Contributions

Device Requirements

Multiexcerpt
MultiExcerptNameBUSDRPS

Project Stream Page: Broadband User Device Requirements

Project Stream Leads: Klaus Wich (Huawei Technologies)

Description: The Device Requirements project stream creates requirements for the development, deployment, and security of broadband users' connected devices.

Multiexcerpt
MultiExcerptNameBUSDRProjects
ProjectTitleDescriptionResourcesEditorsSD-409Broadband Residential Gateway and Connected Device Security RequirementsThis project collects and defines a set of testable, normative requirements for the development of secure, "carrier grade" broadband routers, gateways, in-home networking (i.e. Wifi) and other connected devices. These requirements form the basis for a test plan and certification program operated by the Broadband Forum. Phase one of this NPIF involves gathering requirements in the context of TR-124, and is the subject of this document.Wiki Page

Jason Walls, QA Cafe

WT-124 Issue 6Functional Requirements for Broadband Residential Gateway DevicesThis project defines a new issue of TR-124 that incorporates any old issues, new contributions, and adds new security requirements from SD-409 and approved contributions.Wiki Page

Jason Walls, QA Cafe

Klaus Wich Huawei Technologies

Compliance Testing

Multiexcerpt
MultiExcerptNameBUSCTPS

Project Stream Page: Compliance Testing Project Stream

Project Stream Leads: Marion Dillon (UNH-IOL) Jason Walls 

Description: This project develops test plans and certification guidelines for standards created by the BUS Work Area.


Multiexcerpt
MultiExcerptNameBUSCTProjects


ID106CWMP Data Model Verification
ProjectTitleDescriptionResourcesEditors

ATP-

069 Issue 2

TR-069 Abstract Test Plan

The purpose of ID-106 is to provide a set of test cases, which will be used as a common testing language during CWMP CPE certification.

Contributions

Marion Dillon, UNH InterOperability Lab

ATP-069 provides a test plan that may be used to verify conformance of a CPE Device to the requirements defined in TR-069.

In force version: ATP-069 Issue 2 Corrigendum 1


DTP-181 Amendment 3ID-181

CWMP Interoperability and Functionality Test Plan

In order to ensure the continued growth of the TR-069 market and further the interoperability of the protocol, the Broadband Forum is creating a TR-069 Certification Program. Within this program, devices implementing a TR-069 management interface may be tested for their conformance to the TR-069 specification and various use cases.  The TR-069 Certification Program started with the TR-069 Conformance Test Plan and now the CWMP Data Model Implementation Test Plan.  To provide a consistent scope for this verification, BBF developed these test plans that are to be used by the testing agencies in the verification process.

This Internal Document provides a test plan that may be used to verify Interoperability of a CPE Device with an ACS Server through use cases.

Contributions

Marion Dillon, UNH InterOperability Lab

Assessment of xCONF for CPE Management

Specification

Kanban Board

In force version: TP-181 Amendment 2


DTP-469Conformance Test Plan for USP Agents

Testing is crucial to promoting the interoperability and adoption of standards. To meet this, the Broadband Forum regularly produces test suites that validate the conformance of implementations of their standards. This specification defines the test setup, test procedures, and test metrics to validate Agent and implementations of the User Services Platform (USP), published as BBF TR-369.

This purpose of this document is to provide a definitive guide for validating the compliance of USP Agents in accordance with the specification.

The tests defined below are intended to validate the specific requirements outlined in the USP specification, as well as those requirements defined in the Device:2 Data Model for USP Agents for objects, parameters, commands, and events necessary for the operation of USP.

Test Plan

Bitbucket

Kanban Board

In force version: TP-469 Amendment 1

Jason Walls, QA Cafe




Subscriber Networking Project Stream (SNIPS)

Multiexcerpt
MultiExcerptNameBUSxCONFPSBUSSubNetPS

Project Stream Page: XCONF CPE Management Subscriber Networking Project Stream

Project Stream Leads: Barbara Stark (AT&TMike Talbert (WNC), Martin Casey (Calix), Madhura Paduvalli (Liberty Global)

Description: This project stream examines the implications of using NETCONF for management of broadband CPE in some installations, and the mapping of BUS Data Models to YANG. TBD


Multiexcerpt
BUSxCONFProjects
MultiExcerptNameBUSSubNetProjects


WT/MD#Project name
Title
Project Description
Resources
Useful LinksEditors

SD-376

CWMP Data Model/YANG Translation Rules and Tools

This document describes the processes and rules that can be used to translate a TR-069 Device:2 data model to a YANG data model. The rules are intended to be implemented in a tool that can automate such translation.

Limitations of such a translated data model will also be described, as well as identifying how to leverage standardized YANG models created by other organizations, where those YANG models overlap with functionality defined in TR-069 data models.

Some service providers have expressed an interest in managing CPE or virtualized CPE-functionality using either netconf or restconf. By providing a YANG rendition of the TR-069 data model, such service providers (and their vendors) can have some consistency between the TR-069 and YANG models.

Contributions

WT-124Functional Requirements for Broadband Residential Gateway Devices

TBD upon next version

WT-398 i4Wi-Fi Residential & SOHO Performance Testing

This test plan provides a set of performance test cases with pass/fail requirements for 802.11n/ac/ax implementations, to assist operators in the selection of Wi-Fi capable devices. Operators will use additional criteria, such as deployment scenarios, customer needs, complexity, when selecting equipment and defining deployment configurations. These test cases are not suitable for consumer selection of devices in the absence of expert level understanding of Wi-Fi operation, configurations, and deployment scenarios. The corresponding certification programs of interoperability are “Wi-Fi 4” “Wi-Fi 5”, and “Wi-Fi 6” for 802.11n, 802.11ac, and 802.11ax in Wi-Fi Alliance, respectively.

The primary goal of TR-398 is to provide a standard set of test cases and framework to measure aspects of the performance between AP (e.g., a CPE with Wi-Fi), one or more reference STA (e.g., PC, integrated testing equipment, etc.), and if applicable, one Wi-Fi repeater,  under controlled laboratory conditions. The test cases are defined for a Device Under Test (DUT – AP only), tested against a or a set of STA. The DUT SHOULD NOT be a reference design and SHOULD contain the necessary system functionality to execute this test plan.

WT-492Software Based Architecture Smart Gateway Design Principles
WT-434

Performance Testing of In-Premises Video Support over Wi-Fi


Jira
serverBBF Jira
serverIdd92875e6-bce1-3b6b-a909-e9268944d601
keyCONTRIB-21137

MD-410Analysis and Requirements for Video Support in Premises

Jira
serverBBF Jira
serverIdd92875e6-bce1-3b6b-a909-e9268944d601
keyCONTRIB-23196





Smart Home PS

Multiexcerpt
MultiExcerptNameBUSSHPS

Project Stream PageSmart Home Project Stream

Project Stream Leads: Tim Spets (Nokia), Jason Walls (QA Cafe)

Description: This project develops 

  • Smart Home product and application requirements based on expectations from service provider deployments
  • Architectures, theories of operations, and guidelines for Smart Home product and application management, fitting into the User Services Platform ecosystem
  • Connectivity & quality assurance test plan/certification for smart home products


Multiexcerpt
MultiExcerptNameBUSSHPSProjects


ProjectTitleDescriptionResourcesEditors
TBDTBD
TBD
Smart Home Active DiscussionsJason Walls (QA Cafe) & Tim Spets (Nokia)




Image Added

Work Area Overview

Mission Statement

Work Area Overview

Mission Statment
:
Excerpt

The Broadband User Services Work Area provides the broadband industry with technical specifications, implementation guides, reference implementations, test plans, and marketing white papers for the deployment, management, and consumption of services by the broadband end user.

Work Area Directors:

  • John Blackford, ARRISCommScope
  • Jason Walls, QA Cafe
Business Impact:

The Broadband User Services Work Area develops specifications and publications to create a new kind of the Broadband experience for the end user and provides new means for service providers and application developers to monetize the broadband user's connection. This ranges from managed WifiWi-Fi, IoT or smart home services, broadband and in-home performance management, and more - all of which open up large markets and profitable business models.

Scope:
  • Develop and evolve the TR-069 CPE WAN Management Protocol and the User Service Platform (USP) to cover existing use cases, machine-to-machine/IoT use cases, and the virtualization of broadband user services
  • Develop and specify new information models to broaden the range of for which TR-069 and USP can be used
  • Develop requirements for broadband user devices and associated software
  • Develop test plans and training programs for Work Area protocols and requirements
  • Develop marketing white papers that supplement Work Area protocols and requirements

Email Lists:

Join or Leave BBF Groups and Email Lists

BUS Calls, Minutes, Agendas

Expand
titleclick to expand ...

Teleconference Meetings

BUS ARO Teleconference Calendar

Main ARO Teleconference Calendar

Wiki Conference Call Schedule

Minutes of Interim Conference Calls (BUS WA)

Minutes of Quarterly Meetings

Pages in this space

children

Quarterly Meeting Minutes (BUS WA)