Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Stripped the editors column and removed the stale WT-473 project

Project Streams

User Services Platform

Multiexcerpt
MultiExcerptNameBUSUSPPS

Project Stream Page: User Services Platform Project Stream

Project Stream Leads:Chen Li (AT&T) and Tim Spets (Nokia)

Description: The project stream handles the development, maintenance, and updating of the User Services Platform.


Multiexcerpt
MultiExcerptNameBUSUSPProjects


ProjectTitleDescriptionResourcesEditors
WT-369The User Services Platform

This document describes the architecture, protocol, and data model that builds an intelligent User Service Platform. It is targeted towards application developers, application service providers, CPE vendors, consumer electronics manufacturers, and broadband and mobile network providers who want to expand the value of the end users network connection and their connected devices.

The Data Model Schema and Data Model Objects for USP are developed in the BUS Data Modeling Project Stream (below).

Specification

Bitbucket

Kanban Board

TBD

WT-479Framework for USP-Enabled DOCSIS DevicesShow how USP (TR-369) plus DOCSIS provisioning could do for Cable what TR-142 did for PON in terms of separating physical layer provisioning from higher “service” layer device management.Kanban BoardJohn Blackford (CommScope)


CWMP

Multiexcerpt
MultiExcerptNameBUSCWMPPS

Project Stream Page: CWMP Project Stream

Project Stream Leads: None

Description: This project stream manages the development, maintenance, and updating of the CPE WAN Management Protocol, commonly known as TR-069.


Multiexcerpt
MultiExcerptNameBUSCWMPProjects


ProjectTitleDescriptionResourcesEditors

Nothing being worked on at this time







BUS Data Modeling

Multiexcerpt
MultiExcerptNameBUSCWMPDMPS

Project Stream Page: BUS Data Modeling Project Stream

Project Stream Leads: Matthieu Anne (Orange) and Daniel Egger (Axiros)

Description: This project stream develops the data model objects to manage connected devices using the CPE WAN Management Protocol and/or the User Services Platform. In addition it defines the data model schema and the necessary tool support.


Multiexcerpt
MultiExcerptNameBUSCWMPDMProjects


ProjectTitleDescriptionResources
WT-181 (DEV2DM)WT-181: Device Data Model

WT-181 Issue 2 defines version 2 of the Device Data Model (Device:2) for TR-069 CPEs and USP Agents.

This includes XML files that model interfaces, systems, and services in connected devices which is used to create a consumable HTML report.

In addition an explanatory document, written in in Markdown, exists and is provided as HTML document.

WT-181 Issue 2 Amendment 18 (2.18) is currently in progress.

Document

Bitbucket

Kanban Board

USP datamodel report

CWMP datamodel report

WT-106
(DMSUPP)

WT-106: Data Model Template for CWMP Endpoints and USP Agents

WT-106 specifies data model guidelines to be followed by all CWMP Endpoints and USP Agents.  These guidelines include structural requirements for the data hierarchy, requirements for versioning of data models, and requirements for defining profiles.

In addition, WT-106 defines an XML Schema (the DM Schema) that as far as possible embodies these guidelines, and which is used for defining all CWMP and USP data models.  This makes data model definitions rigorous, and helps to reduce the danger that different implementations will interpret data model definitions in different ways.

WT-106 also defines an XML Schema (the DT Schema) that allows a device to describe its supported data model.

WT-106 Amendment 14 (1.14) is currently in progress.

Document

Bitbucket

Kanban Board


WT-104
(VOIPDM)
WT-104: Voice Service Data Model

WT-104 includes an overview document and XML files used for the VoiceService data model, used in modeling VoIP service functions on a TR-069 Endpoint or USP Agent.

There're currently no active plans towards a new release of WT-104.

Bitbucket

Kanban Board

WT-135
(STBDM)

WT-135: Set Top Box Service Data Model

WT-135 includes an overview document and XML files used for the STBService data model, used in modeling Set Top Box service functions on a TR-069 Endpoint or USP Agent.

There're currently no active plans towards a new release of WT-135.

Bitbucket

Kanban Board

WT-140
(NASDM)

WT-140: Storage Service Data Model

WT-140 includes an overview document and XML files used for the StorageService data model, used in modelling Network Attached Storage service functions on a TR-069 Endpoint or USP Agent.

There're currently no active plans towards a new release of WT-140.

Bitbucket

Kanban Board

WT-196
(FAPDM)
WT-196: Femto Access Point Service Data Model

WT-196 includes an overview document and XML files used for the FAPService data model, used in modeling Femto Access Point (or Small Cell) service functions on a TR-069 Endpoint or USP Agent.

There're currently no active plans towards a new release of WT-196.

Bitbucket

Kanban Board


WT-354
(DMR)
WT-354: Data Model Report Tool

WT-354 is the umbrella project for the CWMP and USP data model processing tool. There're two versions for the tool currently in use to process our data model reports.

This new version (written in Python) will be well-structured, maintainable, and will encourage collaborative development and will eventually fully replace the old tool (written in Perl).

Work towards the next release of the new report tool (2.2) is currently ongoing.

Old report tool release page

New report tool release page

Bitbucket

Kanban Board

WT-143
(PERMON) 

WT-143: Enabling Network Throughput Performance Tests and Statistical Monitoring

WT-143 outlines the theory of operations for Network Service Providers to initiate performance throughput tests and monitor data on  IP interfaces of  CPE and end-user networking devices using the mechanisms defined in TR-181 (the Device Data Model) and operated via the CPE WAN Management Protocol (TR-069) or the User Services Platform (TR-369).

Bitbucket (same as WT-181)

Kanban Board


Compliance Testing

Multiexcerpt
MultiExcerptNameBUSCTPS

Project Stream Page: Compliance Testing Project Stream

Project Stream Leads: Jason Walls 

Description: This project develops test plans and certification guidelines for standards created by the BUS Work Area.


Multiexcerpt
MultiExcerptNameBUSCTProjects


ProjectTitleDescriptionResourcesEditors

ATP-069 Issue 2

TR-069 Abstract Test Plan

ATP-069 provides a test plan that may be used to verify conformance of a CPE Device to the requirements defined in TR-069.

In force version: ATP-069 Issue 2 Corrigendum 1


DTP-181 Amendment 3

CWMP Interoperability and Functionality Test Plan

In order to ensure the continued growth of the TR-069 market and further the interoperability of the protocol, the Broadband Forum is creating a TR-069 Certification Program. Within this program, devices implementing a TR-069 management interface may be tested for their conformance to the TR-069 specification and various use cases.  The TR-069 Certification Program started with the TR-069 Conformance Test Plan and now the CWMP Data Model Implementation Test Plan.  To provide a consistent scope for this verification, BBF developed these test plans that are to be used by the testing agencies in the verification process.

This Internal Document provides a test plan that may be used to verify Interoperability of a CPE Device with an ACS Server through use cases.

Specification

Kanban Board

In force version: TP-181 Amendment 2


DTP-469Conformance Test Plan for USP Agents

Testing is crucial to promoting the interoperability and adoption of standards. To meet this, the Broadband Forum regularly produces test suites that validate the conformance of implementations of their standards. This specification defines the test setup, test procedures, and test metrics to validate Agent and implementations of the User Services Platform (USP), published as BBF TR-369.

This purpose of this document is to provide a definitive guide for validating the compliance of USP Agents in accordance with the specification.

The tests defined below are intended to validate the specific requirements outlined in the USP specification, as well as those requirements defined in the Device:2 Data Model for USP Agents for objects, parameters, commands, and events necessary for the operation of USP.

Test Plan

Bitbucket

Kanban Board

In force version: TP-469 Amendment 1

Jason Walls, QA Cafe




Subscriber Networking Project Stream (SNIPS)

Multiexcerpt
MultiExcerptNameBUSSubNetPS

Project Stream Page: Subscriber Networking Project Stream

Project Stream Leads: Mike Talbert (WNC), Martin Casey (Calix), Madhura Paduvalli (Liberty Global)

Description: TBD


Multiexcerpt
MultiExcerptNameBUSSubNetProjects


WT/MD#Project nameProject DescriptionUseful LinksEditors
WT-124Functional Requirements for Broadband Residential Gateway Devices

TBD upon next version

WT-398 i4Wi-Fi Residential & SOHO Performance Testing

This test plan provides a set of performance test cases with pass/fail requirements for 802.11n/ac/ax implementations, to assist operators in the selection of Wi-Fi capable devices. Operators will use additional criteria, such as deployment scenarios, customer needs, complexity, when selecting equipment and defining deployment configurations. These test cases are not suitable for consumer selection of devices in the absence of expert level understanding of Wi-Fi operation, configurations, and deployment scenarios. The corresponding certification programs of interoperability are “Wi-Fi 4” “Wi-Fi 5”, and “Wi-Fi 6” for 802.11n, 802.11ac, and 802.11ax in Wi-Fi Alliance, respectively.

The primary goal of TR-398 is to provide a standard set of test cases and framework to measure aspects of the performance between AP (e.g., a CPE with Wi-Fi), one or more reference STA (e.g., PC, integrated testing equipment, etc.), and if applicable, one Wi-Fi repeater,  under controlled laboratory conditions. The test cases are defined for a Device Under Test (DUT – AP only), tested against a or a set of STA. The DUT SHOULD NOT be a reference design and SHOULD contain the necessary system functionality to execute this test plan.

WT-492Software Based Architecture Smart Gateway Design Principles
WT-434

Performance Testing of In-Premises Video Support over Wi-Fi


Jira
serverBBF Jira
serverIdd92875e6-bce1-3b6b-a909-e9268944d601
keyCONTRIB-21137

MD-410Analysis and Requirements for Video Support in Premises

Jira
serverBBF Jira
serverIdd92875e6-bce1-3b6b-a909-e9268944d601
keyCONTRIB-23196





Smart Home PS

Multiexcerpt
MultiExcerptNameBUSSHPS

Project Stream PageSmart Home Project Stream

Project Stream Leads: Tim Spets (Nokia), Jason Walls (QA Cafe)

Description: This project develops 

  • Smart Home product and application requirements based on expectations from service provider deployments
  • Architectures, theories of operations, and guidelines for Smart Home product and application management, fitting into the User Services Platform ecosystem
  • Connectivity & quality assurance test plan/certification for smart home products


Multiexcerpt
MultiExcerptNameBUSSHPSProjects


ProjectTitleDescriptionResourcesEditors
TBDTBD
TBD
Smart Home Active DiscussionsJason Walls (QA Cafe) & Tim Spets (Nokia)




Image Added

Work Area Overview

Mission Statement:
Excerpt

The Broadband User Services Work Area provides the broadband industry with technical specifications, implementation guides, reference implementations, test plans, and marketing white papers for the deployment, management, and consumption of services by the broadband end user.

Work Area Directors:

  • John Blackford, CommScope
  • Jason Walls, QA Cafe
Business Impact:

The Broadband User Services Work Area develops specifications and publications to create a new kind of the Broadband experience for the end user and provides new means for service providers and application developers to monetize the broadband user's connection. This ranges from managed Wi-Fi, IoT or smart home services, broadband and in-home performance management, and more - all of which open up large markets and profitable business models.

Scope:
  • Develop and evolve the TR-069 CPE WAN Management Protocol and the User Service Platform (USP) to cover existing use cases, machine-to-machine/IoT use cases, and the virtualization of broadband user services
  • Develop and specify new information models to broaden the range of for which TR-069 and USP can be used
  • Develop requirements for broadband user devices and associated software
  • Develop test plans and training programs for Work Area protocols and requirements
  • Develop marketing white papers that supplement Work Area protocols and requirements

Email Lists:

Join or Leave BBF Groups and Email Lists

BUS Calls, Minutes, Agendas

Expand
titleclick to expand ...

Teleconference Meetings

Interim Conference Calls (BUS WA)

Quarterly Meeting Minutes (BUS WA)

Note: this is a draft Work Area Structure

Expand
titleThe Broadband User Services Work Area provides the broadband industry with technical specifications, implementation guides, reference implementations, test plans, and marketing white papers for the deployment, management, and consumption of services by the broadband end user. This Work Area represents the end user perspective when incorporating into the Broadband Forum architecture. more ...
Business Impact:

The Broadband User Services Work Area develops specifications and publications to create a new kind of the Broadband experience for the end user and provides new means for service providers and application developers to monetize the broadband user's connection. This ranges from on-demand performance assured business and entertainment services, IoT services related to energy, security, environment, etc. to user control of what can become the data center in the home and small business managed and control with zero- touch diagnostics. All of which opens up large markets and profitable business models.

Scope:
  • Develop and evolve the TR-069 CPE WAN Management Protocol and a Universal Service Platform (USP) to cover existing use cases, machine-to-machine/IoT use cases, and the virtualization of broadband user services, prioritized by their potential business value
  • Develop and specify new information models to broaden the range of for which TR-069 and USP can be used
  • Develop requirements for broadband user devices and associated software
  • Develop test plans and training programs for Work Area protocols and requirements
  • Develop marketing white papers that supplement Work Area protocols and requirements
Expand
titleCalls, Agendas, Minutes

Calendar

Expand
titleKey Work Area projects

 

Expand
titleRecently activity, uploads

Recently Updated
typespage, comment, blogpost
max5
hideHeadingtrue
themesocial

Image Removed

Work Area Directors

John Blackford

Jason Walls

Project Stream Leads/Editors

Project Streams

NPIFs

Completed specs and education documents

Scratchpad structure

Working Texts

WT-069a6CPE WAN Management ProtocolClick HereKlaus Wich, Axiros
John Blackford, ArrisWT-124i5Functional Requirements for Broadband Residential Gateway Devices - Issue 5Click HereJean-Didier Ott, OrangeWT-140a3TR-069 Data Model for Storage Service Enabled Devices - Amendment 3Click HereKlaus Wich, AxirosWT-181i2c2Device Data Model for TR-069
Issue 2 Corrigendum 2Click HereTimothy Carey, NokiaWT-181i2a11Device Data Model for TR-069
Issue 2 Amendment 11Click HereKlaus Wich, AxirosWT-196i2c3Femto Access Point Service Data ModelClick HereTim Carey, NokiaWT-356Alternate Management Path for BroadbandClick HerePeter Silverman, ASSIA Inc.WT-369Universal Service Platform (USP)Click HereBarbara Stark, AT&T
Tim Spets, Greenwave Systems
Jason Walls, QA Cafe

Marketing Drafts

MD-353Best Practices for Deploying TR-069 - WhitepaperClick HereSteve Nicolai, Arris
Jason Walls, QA CafeMD-363Home Network Diagnostics Mechanisms and Best Practices - WhitepaperClick HereBarbara Stark, AT&T
Miodrag Djurica, KPN

Study Documents

SD-279TR-069 Proxy Management Implementation GuidelinesClick HereWenchao Liu, China Telecom
Tim Spets, GreenWave Systems
Yu Zhu, Huawei TechnologiesSD-323BBHome Work Items Related to WT-304Click HereBarbara Stark, AT&T
Tim Carey, NokiaSD-324TR-069 Protocol and Transport SeparationClick HereWilliam Lupton, Broadband ForumSD-333Intra Customer Premises Network MeasurementsClick HereMiodrag Djurica, KPN SD-344CWMP Root Data Model Transition MechanismsClick HereDan-Han Tsai, Broadcom
Jason Walls, QA CafeSD-354New BBF CWMP Report ToolClick HereWilliam Lupton, Broadband ForumSD-375Applicability of RESTCONF and NETCONF for CPE ManagementClick HereOlaf Bonness, DTSD-376CWMP Data Model/YANG Translation Rules and ToolsClick HereWilliam Lupton, BBF
Tim Carey, Nokia

 

 

Internal Documents

ID-069i2TR-069 Conformance Test Plan
Issue 2Click HereMarion Dillon, UNH InterOperability LabID-106CWMP Data Model Verification Test PlanClick HereMarion Dillon, UNH InterOperability LabID-181CWMP Interoperability and Functionality Test PlanClick HereMarion Dillon, UNH InterOperability Lab

Issues List

IL-069TR-069 Proposed ChangesClick HereKlaus Wich, AxirosIL-104TR-104 Issues ListClick HereJean-Didier Ott, OrangeIL-106TR-106 DM and DT Schema Proposed ChangesClick HereWilliam Lupton, Broadband ForumIL-124TR-124 Issues ListClick HereJean-Didier Ott, OrangeIL-157Proposed TR-069 Data Model Objects & ParametersClick HereTimothy Carey, NokiaIL-181Device:2 Data Model and TR-181 Issue 2 Proposed ChangesClick HereWilliam Lupton, Broadband Forum

Other Documents

OD-148CWMP Index Page Configuration FileClick HereWilliam Lupton, Broadband ForumOD-290BroadbandHome Publication GuidelinesClick HereWilliam Lupton, Broadband ForumOD-361Program Requirements for BBF.069 Certification ProgramClick HereMarion Dillon, UNH InterOperability Lab