Versions Compared

Old Version 81

changes.mady.by.user Gabby Bond

Saved on

compared with

New Version Current

changes.mady.by.user Jason Walls

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Project Streams

User Services Platform

Multiexcerpt
MultiExcerptNameBUSUSPPS

Project Stream Page: User Services Platform Project Stream

Project Stream Leads:Chen Li (AT&T) and Tim Spets (Nokia)

Description: The project stream handles the development, maintenance, and updating of the User Services Platform.


Multiexcerpt
MultiExcerptNameBUSUSPProjects


ProjectTitleDescriptionResourcesEditors
WT-369The User Services Platform

This document describes the architecture, protocol, and data model that builds an intelligent User Service Platform. It is targeted towards application developers, application service providers, CPE vendors, consumer electronics manufacturers, and broadband and mobile network providers who want to expand the value of the end users network connection and their connected devices.

The Data Model Schema and Data Model Objects for USP are developed in the BUS Data Modeling Project Stream (below).

Specification

Bitbucket

Kanban Board

TBD

WT-479Framework for USP-Enabled DOCSIS DevicesShow how USP (TR-369) plus DOCSIS provisioning could do for Cable what TR-142 did for PON in terms of separating physical layer provisioning from higher “service” layer device management.Kanban BoardJohn Blackford (CommScope)


CWMP

Multiexcerpt
MultiExcerptNameBUSCWMPPS

Project Stream Page: CWMP Project Stream

Project Stream Leads: None

Description: This project stream manages the development, maintenance, and updating of the CPE WAN Management Protocol, commonly known as TR-069.


Multiexcerpt
MultiExcerptNameBUSCWMPProjects


ProjectTitleDescriptionResourcesEditors

Nothing being worked on at this time







BUS Data Modeling

Multiexcerpt
MultiExcerptNameBUSCWMPDMPS

Project Stream Page: BUS Data Modeling Project Stream

Project Stream Leads: Matthieu Anne (Orange) and Daniel Egger (Axiros)

Description: This project stream develops the data model objects to manage connected devices using the CPE WAN Management Protocol and/or the User Services Platform. In addition it defines the data model schema and the necessary tool support.


Multiexcerpt
MultiExcerptNameBUSCWMPDMProjects


ProjectTitleDescriptionResourcesEditors
WT-181 (DEV2DM)WT-181: Device Data Model

WT-181 Issue 2 defines version 2 of the Device Data Model (Device:2) for TR-069 Endpoints and USP Agents. This includes an overview document and XML files that model interfaces, systems, and services in connected devices.

WT-181 Issue 2 Amendment 14 is currently in progress.

Document

Bitbucket

Kanban Board

TBD

WT-106
(DMSUPP)

WT-106: Data Model Template for CWMP Endpoints and USP Agents

WT-106 specifies data model guidelines to be followed by all CWMP Endpoints and USP Agents.  These guidelines include structural requirements for the data hierarchy, requirements for versioning of data models, and requirements for defining profiles.

In addition, WT-106 defines an XML Schema (the DM Schema) that as far as possible embodies these guidelines, and which is used for defining all CWMP and USP data models.  This makes data model definitions rigorous, and helps to reduce the danger that different implementations will interpret data model definitions in different ways.

WT-106 also defines an XML Schema (the DT Schema) that allows a device to describe its supported data model.  This description is both specific and detailed, allowing a Controller to know exactly what is supported by the device, including any vendor-specific objects and parameters.  Use of this Schema enhances interoperability and significantly eases the integration of new devices with a Controller.  USP uses a different mechanism for the same purpose; this mechanism is specified in TR-369.

WT-106 Amendment 10 is currently in progress.

Document

Bitbucket

Kanban Board


Jason Walls, QA Cafe

WT-104
(VOIPDM)		WT-104: Voice Service Data Model

WT-104 includes an overview document and XML files used for the VoiceService data model, used in modeling VoIP service functions on a TR-069 Endpoint or USP Agent.

There is currently no active development version of WT-104.

Bitbucket

Kanban Board

Tim Spets, Greenwave

WT-135
(STBDM)

WT-135: Set Top Box Service Data Model

WT-135 includes an overview document and XML files used for the STBService data model, used in modeling Set Top Box service functions on a TR-069 Endpoint or USP Agent.

There is currently no active development version of WT-135.

Bitbucket

Kanban Board

William Lupton, BBF

WT-140
(NASDM)

WT-140: Storage Service Data Model

WT-140 includes an overview document and XML files used for the StorageService data model, used in modelling Network Attached Storage service functions on a TR-069 Endpoint or USP Agent.

There is currently no active development version of WT-140.

Bitbucket

Kanban Board

John Blackford, CommScope

WT-196
(FAPDM)		WT-196: Femto Access Point Service Data Model

WT-196 includes an overview document and XML files used for the FAPService data model, used in modeling Femto Access Point (or Small Cell) service functions on a TR-069 Endpoint or USP Agent.

There is currently no active development version of WT-196.

Bitbucket

Kanban Board


TBD
WT-354
(DMR)		WT-354: Data Model Report Tool

WT-354 will describe a new CWMP and USP data model processing tool. This new tool (written in python) will be well-structured, maintainable, and will encourage collaborative development. The new tool will replace the old tool (written in perl).

Bitbucket

Kanban Board

William Lupton, BBF

WT-143
(PERMON) 

WT-143: Enabling Network Throughput Performance Tests and Statistical Monitoring

WT-143 outlines the theory of operations for Network Service Providers to initiate performance throughput tests and monitor data on  IP interfaces of  CPE and end-user networking devices using the mechanisms defined in TR-181 (the Device Data Model) and operated via the CPE WAN Management Protocol (TR-069) or the User Services Platform (TR-369).

WT-143 Amendment 2 is currently in progress.

Bitbucket (same as WT-181)

Kanban Board

Jason Walls, QA Cafe

Anchor
wt473
wt473
WT-473
(DMYANG)

WT-473: YANG Translation for CWMP / USP Data ModelsWT-473 will document translation rules and tools for converting the WT-181 data model to two YANG schema representations: (1) Monolithic generic YANG model that is structured as faithfully as possible to the XML model and (2) YANG modules that would be suitable for implementations that can integrate with other YANG Modules - e.g., IETF-defined YANG modules.

Bitbucket

Kanban Board

Andrew Patka, Verizon


Compliance Testing

Multiexcerpt
MultiExcerptNameBUSCTPS

Project Stream Page: Compliance Testing Project Stream

Project Stream Leads: Jason Walls 

Description: This project develops test plans and certification guidelines for standards created by the BUS Work Area.


Multiexcerpt
MultiExcerptNameBUSCTProjects


ProjectTitleDescriptionResourcesEditors

ATP-069 Issue 2

TR-069 Abstract Test Plan

ATP-069 provides a test plan that may be used to verify conformance of a CPE Device to the requirements defined in TR-069.

In force version: ATP-069 Issue 2 Corrigendum 1


DTP-181 Amendment 3

CWMP Interoperability and Functionality Test Plan

In order to ensure the continued growth of the TR-069 market and further the interoperability of the protocol, the Broadband Forum is creating a TR-069 Certification Program. Within this program, devices implementing a TR-069 management interface may be tested for their conformance to the TR-069 specification and various use cases.  The TR-069 Certification Program started with the TR-069 Conformance Test Plan and now the CWMP Data Model Implementation Test Plan.  To provide a consistent scope for this verification, BBF developed these test plans that are to be used by the testing agencies in the verification process.

This Internal Document provides a test plan that may be used to verify Interoperability of a CPE Device with an ACS Server through use cases.

Specification

Kanban Board

In force version: TP-181 Amendment 2


DTP-469Conformance Test Plan for USP Agents

Testing is crucial to promoting the interoperability and adoption of standards. To meet this, the Broadband Forum regularly produces test suites that validate the conformance of implementations of their standards. This specification defines the test setup, test procedures, and test metrics to validate Agent and implementations of the User Services Platform (USP), published as BBF TR-369.

This purpose of this document is to provide a definitive guide for validating the compliance of USP Agents in accordance with the specification.

The tests defined below are intended to validate the specific requirements outlined in the USP specification, as well as those requirements defined in the Device:2 Data Model for USP Agents for objects, parameters, commands, and events necessary for the operation of USP.

Test Plan

Bitbucket

Kanban Board

In force version: TP-469 Amendment 1

Jason Walls, QA Cafe




Subscriber Network Infrastructure Project Stream (SNIPS)

Multiexcerpt
MultiExcerptNameBUSSNIPS

Project Stream Page: Subscriber Network Infrastructure Project Stream (SNIPS)

Project Stream Leads: Mike Talbert (WNC) and Martin Casey (Calix)

Description: To develop specifications related to the architecture and performance of the subscriber network. 


Multiexcerpt
MultiExcerptNameBUSSNIPSProjects


ProjectTitleDescriptionResourcesEditors
WT-488Architecture and Requirements for Home Distribution Networks

This technical report intends to provide insights into home network use cases to facilitate the task of understanding the specificities of enabling a service provider-oriented home network. 

Project Scope: 

  • Use cases for delivery E2E delivery of services to the end user
  • General architecture, management, and operational aspects of a Home Distribution Network
  • Deployment models for connectivity of end user devices
  • Components of home distribution network
  • Available In-home connectivity technologies
  • Aspects of the RG functionality and management specific to the architecture and management requirements of HDN

Aleksandra Kozarev (MaxLinear)

Mike Talbert (WNC)


WT-398 Issue 3Wi-Fi Residential & SOHO Performance Testing This test plan provides a set of performance test cases with pass/fail requirements for 802.11n/ac/ax implementations, to assist operators in the selection of Wi-Fi capable devices. Operators will use additional criteria, such as deployment scenarios, customer needs, complexity, when selecting equipment and defining deployment configurations. These test cases are not suitable for consumer selection of devices in the absence of expert level understanding of Wi-Fi operation, configurations, and deployment scenarios. The corresponding certification programs of interoperability are “Wi-Fi 4” “Wi-Fi 5”, and “Wi-Fi 6” for 802.11n, 802.11ac, and 802.11ax in Wi-Fi Alliance, respectively.WIFIPERF: WT-398 Kanban BoardMartin Casey (Calix)
WT-434Performance Test of In-Premises Video Support Over WiFi

TBD



Subscriber Software, Hardware, and Applications PS (SHAPS)

Multiexcerpt
MultiExcerptNameBUSSHAPS

Project Stream Page: Subscriber Software, Hardware, and Applications PS (SHAPS)

Project Stream Leads: Dennis Edwards (Nokia), Jason Walls (QA Cafe)

Description: To produce hardware and software design guidelines and requirements for subscriber devices and compute platforms, including remote gateways, access points, end-user devices, along with the applications enabled by those devices.


Multiexcerpt
MultiExcerptNameBUSSHAPSProjects


ProjectTitleDescriptionResourcesEditors
WT-124 (next version TBA)Functional Requirements for Broadband Residential Gateway Devices
TR-124 specifies a superset of requirements for broadband Residential Gateway (RG) devices that are
capable of supporting a full suite of voice, data, broadcast video, video on demand and two-way video
applications in broadband networks
In-force: TR-124 Issue 7 (PDF)Jason Walls (QA Cafe)
WT-492Software Based Architecture Smart Gateway Design Principles

The overarching guide to building and deploying an ASG and its applications.

Wiki version - WT-492 Software Based Architecture for an App-Enabled Services Gateway - Design PrinciplesMike Talbert (Verizon)



Smart Home PS

Multiexcerpt
MultiExcerptNameBUSSHPS

Project Stream Page: Smart Home Project Stream

Project Stream Leads: Tim Spets (Nokia), Jason Walls (QA Cafe)

Description: This project develops 

  • Smart Home product and application requirements based on expectations from service provider deployments
  • Architectures, theories of operations, and guidelines for Smart Home product and application management, fitting into the User Services Platform ecosystem
  • Connectivity & quality assurance test plan/certification for smart home products


Multiexcerpt
MultiExcerptNameBUSSHPSProjects


ProjectTitleDescriptionResourcesEditors
TBDTBD
TBD
Smart Home Active DiscussionsJason Walls (QA Cafe) & Tim Spets (Nokia)




Image Added

Work Area Overview

Mission Statement:
Excerpt

The Broadband User Services Work Area provides the broadband industry with technical specifications, implementation guides, reference implementations, test plans, and marketing white papers for the deployment, management, and consumption of services by the broadband end user.

Work Area Directors:

  • John Blackford, CommScope
  • Jason Walls, QA Cafe
Business Impact:

The Broadband User Services Work Area develops specifications and publications to create a new kind of the Broadband experience for the end user and provides new means for service providers and application developers to monetize the broadband user's connection. This ranges from managed Wi-Fi, IoT or smart home services, broadband and in-home performance management, and more - all of which open up large markets and profitable business models.

Scope:
  • Develop and evolve the TR-069 CPE WAN Management Protocol and the User Service Platform (USP) to cover existing use cases, machine-to-machine/IoT use cases, and the virtualization of broadband user services
  • Develop and specify new information models to broaden the range of for which TR-069 and USP can be used
  • Develop requirements for broadband user devices and associated software
  • Develop test plans and training programs for Work Area protocols and requirements
  • Develop marketing white papers that supplement Work Area protocols and requirements

Email Lists:

Join or Leave BBF Groups and Email Lists

BUS Calls, Minutes, Agendas

Expand
titleclick to expand ...

Teleconference Meetings

Interim Conference Calls (BUS WA)

Quarterly Meeting Minutes (BUS WA)

Image Removed

Work Area Overview

Mission Statment:
Excerpt

The Broadband User Services Work Area provides the broadband industry with technical specifications, implementation guides, reference implementations, test plans, and marketing white papers for the deployment, management, and consumption of services by the broadband end user. This Work Area represents the end user perspective when incorporating into the Broadband Forum architecture.

Work Area Directors: John Blackford, ARRIS, Jason Walls, QA Cafe

Business Impact:

The Broadband User Services Work Area develops specifications and publications to create a new kind of the Broadband experience for the end user and provides new means for service providers and application developers to monetize the broadband user's connection. This ranges from on-demand performance assured business and entertainment services, IoT services related to energy, security, environment, etc. to user control of what can become the data center in the home and small business managed and control with zero- touch diagnostics. All of which opens up large markets and profitable business models.

Scope:
  • Develop and evolve the TR-069 CPE WAN Management Protocol and the User Service Platform (USP) to cover existing use cases, machine-to-machine/IoT use cases, and the virtualization of broadband user services, prioritized by their potential business value
  • Develop and specify new information models to broaden the range of for which TR-069 and USP can be used
  • Develop requirements for broadband user devices and associated software
  • Develop test plans and training programs for Work Area protocols and requirements
  • Develop marketing white papers that supplement Work Area protocols and requirements

ARO Work Area View https://aro.broadband-forum.org/bin/c5i?rid=68&k1=5

Project Streams

Multiexcerpt
MultiExcerptNameBUSNonPS

Project Stream

Description

PS Leadership

Non-PS Assigned

Projects that don’t fit under the scope of an existing Project Stream or if they fit under the scope of more than one Project Stream, are developed under the Non-PS Assigned category. 

John Blackford, Arris

Jason Walls, QA Café

Multiexcerpt
MultiExcerptNameBUSAMPPS

Project Stream

Description

PS Leadership

Alternate Management Path

 

Peter Silverman, ASSIA

Multiexcerpt
MultiExcerptNameBUSxCONFPS

Project Stream

Description

PS Leadership

Assessment of xCONF for CPE Management

 

Barbara Stark, AT&T

Multiexcerpt
MultiExcerptNameBUSCTPS

Project Stream

Description

PS Leadership

Compliance Testing

 

Marion Dillon, UNH IOL

Multiexcerpt
MultiExcerptNameBUSCWMPPS

Project Stream

Description

PS Leadership

CWMP

 

John Blackford, Arris

Klaus Wich, Huawei Technologies 

Multiexcerpt
MultiExcerptNameBUSCWMPDMPS

Project Stream

Description

PS Leadership

CWMP Data Model

 CWMP (TR-069) data model definitions. Also includes some projects that have in the past lived in their own separate (transitory) Project Streams (it seems appropriate to keep such projects here, at least for now).

William Lupton, Broadband Forum

Klaus Wich, Huawei Technologies

Multiexcerpt
MultiExcerptNameBUSDRPS

Project Stream

Description

PS Leadership

Device Requirements

 

Jean-Didier Ott, Orange  

Multiexcerpt
MultiExcerptNameBUSNMPS

Project Stream

Description

PS Leadership

Network Measurement

 

Tim Carey, Nokia
Barbara Stark, AT&T
Miodrag Djurica, KPN

Multiexcerpt
MultiExcerptNameBUSSTPS

Project Stream

Description

PS Leadership

Software Tools

 

William Lupton, Broadband Forum

Multiexcerpt
MultiExcerptNameBUSUSPPS

Project Stream

Description

PS Leadership

User Services Platform

 

Barbara Stark, AT&T
Tim Spets, GreenWave Systems

Multiexcerpt
MultiExcerptNameBUSVSDMPS

Project Stream

Description

PS Leadership

Voice Service Data Model for CWMP

 

Jean-Didier Ott, Orange

Multiexcerpt
MultiExcerptNameWiFiIPPS

Project Stream

Description

PS Leadership

Wi-Fi In-Premises

 Project is joint between Physical Layer Transmission and Broadband User Services

Les Brown, Huawei Technologies

Tony Zeng, Huawei Technologies

Image Removed

Broadband User Services Work Area Email List

memgen@broadband-forum.org

  • List for all BBF Members to receive general information

contrib@broadband-forum.org

  • List for notification of BBF Contribution Uploads/Updates in ARO

bus@broadband-forum.org

  • List for BBF Broadband User Services WA

xml@broadband-forum.org

  • List for Broadband User Services WA report tool development & maintenance

cwmp-testing@broadband-forum.org

  • This mailing is for the TR-069 testing discussions
Expand
titleHow to subscribe to a mailing list...
  1. Sign in to ARO
  2. Scroll through to find the email list of interest to you
  3. Click Subscribe/Unsubscribe next to the list name

If you would like to learn what the subject matter of a list is, switch a list to digest mode (receive one email per-day with a summary of all emails sent to the list), view or search the archives or see whom else is subscribed; click on the list name.

BUS Calls, Minutes, Agendas

Expand
titleclick to expand ...

BUS ARO Teleconference Calendar

Main ARO Teleconference Calendar

Wiki Conference Call Schedule

Minutes of Interim Conference Calls

Minutes of Quarterly Meetings

Pages in this space

Children Display

Projects in Progress for this Work Area

Multiexcerpt
MultiExcerptNameBUSNonProjects

WT/ID/MD/SD/IL#

Non-PS Assigned Projects

Abstract

Related Contributions

Editor(s)

 No open projects at this time.

Multiexcerpt
MultiExcerptNameBUSAMProjects

WT/ID/MD/SD/IL#

Alternate Management Path Projects

Abstract

Related Contributions

Editor(s)

No open projects at this time. Multiexcerpt
MultiExcerptNameBUSxCONFProjects

WT/ID/MD/SD/IL#

Assessment of xCONF for CPE Management Projects

Abstract

Related Contributions

Editor(s)

SD-376

CWMP Data Model/YANG Translation Rules and Tools

This document describes the processes and rules that can be used to translate a TR-069 Device:2 data model to a YANG data model. The rules are intended to be implemented in a tool that can automate such translation.

 

Limitations of such a translated data model will also be described, as well as identifying how to leverage standardized YANG models created by other organizations, where those YANG models overlap with functionality defined in TR-069 data models.

 

Some service providers have expressed an interest in managing CPE or virtualized CPE-functionality using either netconf or restconf. By providing a YANG rendition of the TR-069 data model, such service providers (and their vendors) can have some consistency between the TR-069 and YANG models.

Click Here

William Lupton, Broadband Forum 
Tim Carey, Nokia

Multiexcerpt
MultiExcerptNameBUSCTProjects

WT/ID/MD/SD/IL#

Compliance Testing Projects

Abstract

Related Contributions

Editor(s)

ID-106

CWMP Data Model Verification Test Plan

The purpose of ID-106 is to provide a set of test cases, which will be used as a common testing language during CWMP CPE certification.

Click Here

Marion Dillon, UNH InterOperability Lab

ID-181

CWMP Interoperability and Functionality Test Plan

In order to ensure the continued growth of the TR-069 market and further the interoperability of the protocol, the Broadband Forum is creating a TR-069 Certification Program. Within this program, devices implementing a TR-069 management interface may be tested for their conformance to the TR-069 specification and various use cases.  The TR-069 Certification Program started with the TR-069 Conformance Test Plan and now the CWMP Data Model Implementation Test Plan.  To provide a consistent scope for this verification, BBF developed these test plans that are to be used by the testing agencies in the verification process.

This Internal Document provides a test plan that may be used to verify Interoperability of a CPE Device with an ACS Server through use cases.

Click Here

Marion Dillon , UNH InterOperability Lab

Multiexcerpt
MultiExcerptNameBUSCWMPProjects

WT/ID/MD/SD/IL#

CWMP Projects

Abstract

Related Contributions

Editor(s)

WT-069 Amendment 6

CPE WAN Management Protocol

This Working Text defines version 1.5 of the CPE WAN Management Protocol, incorporating items from the Issue List IL-069 that have been promoted to accepted by the time of straw ballot.  It includes updates to the firmware management system, security updates, and updates to the XMPP connection request and notification mechanisms.

Click Here

John Blackford, Arris

Klaus Wich, Huawei Technologies

IL-069

TR-069 Proposed Changes

 

Click Here

John Blackford, ARRIS

Multiexcerpt
MultiExcerptNameBUSCWMPDMProjects

WT/ID/MD/SD/IL#

(ARO Link)

CWMP Data Model Projects

(wiki Link)

Abstract

Related Contributions

Editor(s)

WT-181 Issue 2 Amendment 12

Device Data Model for TR-069

TR-181 Issue 2 defines version 2 of the TR-069 Device data model (Device:2). The Device:2 data model applies to all types of TR-069-enabled devices, including End Devices, Residential Gateways, and other Network Infrastructure Devices. It represents a next generation evolution that supersedes both Device:1 and InternetGatewayDevice:1.

Click Here

Steve Nicolai, Arris

IL-106

TR-106 DM and DT Schema Proposed Changes

 

Click Here

William Lupton, Broadband Forum 

IL-181

Device:2 Data Model and TR-181 Issue 2 Proposed Changes

 

Click Here

William Lupton, Broadband Forum

IL-157

Proposed TR-069 Data Model Objects & Parameters

 

Click Here

Timothy Carey, Nokia

Multiexcerpt
MultiExcerptNameBUSD210Projects

WT/ID/MD/SD/IL#

Device 2.10 Projects

Abstract

Related Contributions

Editor(s)

 No open projects at this time.

Multiexcerpt
MultiExcerptNameBUSDRProjects

WT/ID/MD/SD/IL#

Device Requirements Projects

Abstract

Related Contributions

Editor(s)

IL-124

TR-124 Issues List

 

Click Here

Jean-Didier Ott, Orange

Multiexcerpt
MultiExcerptNameBUSNMProjects

WT/ID/MD/SD/IL#

Network Measurement Projects

Abstract

Related Contributions

Editor(s)

WT-382

IEEE 1905.1 Reference Implementation

This Working Text defines a reference implementation of all mandatory and some optional parts of the 1905.1a profile version (defined in IEEE 1905.1a), ITU-T G.9977, and G.9979.

Click Here

Barbara Stark, AT&T
Marcos Martinez, Marvell

MD-353

Best Practices for Deploying TR-069 - Whitepaper

Home networks are usually installed, operated, and owned by the end user, who in a few cases is an expert, but most likely will have relatively little knowledge of network technologies, and little time or patience to diagnose problems should they occur. However, these end users expect their home networks to reliably support the delivery of a wide variety of Internet services and applications. The user may encounter unacceptable performance of the applications they use due to home network misconfigurations, noise or interference that impacts the behavior of home networking technologies, or other problems. Home network problems often cause Internet services and the users applications to underperform or stop altogether, causing end users to call the Internet Service Provider (ISP) help desk.

 

While ISPs possess tools to manage their own core and access networks, management of home  network problems often requires different tools and techniques. Gathering home network specific information may be required and interpreting this information to arrive at a remedy for a problem can require specific expertise. This Marketing Report provides an overview of some of the tools and techniques that can aid an ISP or Network Operator in diagnosing the cause of home network related performance and reliability issues that affect the quality of experience of their customers. The application of these tools is described for specific use cases.

Click Here

Steve Nicolai, Arris
Jason Walls, QA Cafe

SD-323

BBHome Work Items Related to WT-304

 

Click Here

Barbara Stark, AT&T 
Tim Carey, Nokia

Multiexcerpt
MultiExcerptNameBUSSTProjects

WT/ID/MD/SD/IL#

(ARO Link)

Software Tools

(wiki Link)

Abstract

Related Contributions

Editor(s)

OD-148

CWMP Index Page Configuration File

 

Click Here

William Lupton, Broadband Forum 

Multiexcerpt
MultiExcerptNameBUSUSPProjects

WT/ID/MD/SD/IL#

User Services Platform

Abstract

Related Contributions

Editor(s)

WT-106 Amendment 8

Data Model Template for CWMP-Enabled Devices and USP Agents 

WT-106 Amendment 8 specifies data model guidelines to be followed by all CWMP Endpoints and USP Agents.  These guidelines include structural requirements for the data hierarchy, requirements for versioning of data models, and requirements for defining profiles.

 

In addition, WT-106 Amendment 8 defines an XML Schema that as far as possible embodies these guidelines, and which is used for defining all CWMP and USP data models.  This makes data model definitions rigorous, and helps to reduce the danger that different implementations will interpret data model definitions in different ways.

 

WT-106 Amendment 8 also defines an XML Schema that allows a device to describe its supported CWMP data models.  This description is both specific and detailed, allowing a Controller to know exactly what is supported by the device, including any vendor-specific objects and parameters.  Use of this Schema enhances interoperability and significantly eases the integration of new devices with a Controller.  USP uses a different mechanism for the same purpose.  That mechanism is specified in TR-369.

 

Click Here

Jean-Didier Ott, Orange

WT-369

User Services Platform (USP)

 

This document describes the architecture, protocol, and data model that builds an intelligent User Services Platform. It is targeted towards application developers, application service providers, CPE vendors, consumer electronics manufacturers, and broadband and mobile network providers who want to expand the value of the end users network connection and their connected devices.

This document describes:

  • The overall architecture of USP Agents, Controllers, and service elements
  • The proxy mechanisms for addressing non-USP service elements
  • Requirements for the transport protocol used to handle USP messages, and defined bindings for specific protocols.
  • The various USP messages, their requirements, and expected behavior patterns, along with on-the-wire encoding of USP messages
  • The protocol requirements for discovery, end-to-end security, authentication, and authorization
  • An explanation of the data model and how it is used to enable USP, service elements, proxying, and object defined operations

 

The objects necessary to implement USP are described in the Device:2 data model of the CPE WAN Management Protocol, (CWMP).

Click Here

Barbara Stark, AT&T
Tim Spets, Greenwave Systems
Jason Walls, QA Cafe

Multiexcerpt
MultiExcerptNameBUSVSDMProjects

WT/ID/MD/SD/IL#

Voice Service Data Model for CWMP Projects

Abstract

Related Contributions

Editor(s)

IL-104

WT-104 Issues List

 

Click Here

Jean-Didier Ott, Orange

Multiexcerpt
MultiExcerptNameWiFiIPProjects

WT/ID/MD/SD/IL#

(ARO Link)

Wi-Fi In-Premises Projects

(wiki Link)

Abstract

Related Contributions

Editor(s)

SD-398

Carrier Grade Wi-Fi - Study on Use Cases, Requirements, and Testing Procedures

The purpose of SD-398 is to collect the use cases and evolving requirements from operators regarding performance testing (to be performed prior to product selection by operators), analyze the existing documents from various SDOs and identify gaps in what they have documented, and identify potential test procedures and test profiles for Wi-Fi performance. This Study Document will enable discussions in that Project Stream prior to any decision to produce other work products such as Technical Reports, Test Plans, or formal cooperation with other standards bodies.

Click Here

Barbara Stark, AT&T
Tony Zeng, Huawei Technologies 

SD-401

Wi-Fi In-Premises Installation and Diagnostics

This SD-401 investigates the use cases and evolving requirements from service providers regarding tools they need to adequately onboard/install, diagnose and adjust deployed Wi-Fi networks and/or devices.

Click Here

Tim Carey, Nokia

Peter Silverman, ASSIA 

Working Texts

WT-069a6

CPE WAN Management Protocol

Relevant Contributions

John Blackford, ARRIS;

Klaus Wich, Huawei

WT-124i5

Functional Requirements for Broadband Residential Gateway Devices - Issue 5

Relevant Contributions

Jean-Didier Ott, Orange

WT-140a3

TR-069 Data Model for Storage Service Enabled Devices - Amendment 3

Relevant Contributions

Steve Nicolai, ARRIS

WT-181i2a12

Device Data Model for TR-069
Issue 2 Amendment 12

Jean-Didier Ott, Orange

WT-369

User Services Platform (USP)

This document describes the architecture, protocol, and data model that builds an intelligent User Services Platform. It is targeted towards application developers, application service providers, CPE vendors, consumer electronics manufacturers, and broadband and mobile network providers who want to expand the value of the end users network connection and their connected devices.

This document describes:

  • The overall architecture of USP Agents, Controllers, and service elements
  • The proxy mechanisms for addressing non-USP service elements
  • Requirements for the transport protocol used to handle USP messages, and defined bindings for specific protocols.
  • The various USP messages, their requirements, and expected behavior patterns, along with on-the-wire encoding of USP messages
  • The protocol requirements for discovery, end-to-end security, authentication, and authorization
  • An explanation of the data model and how it is used to enable USP, service elements, proxying, and object defined operations

 

The objects necessary to implement USP are described in the Device:2 data model of the CPE WAN Management Protocol, (CWMP).

Relevant Contributions

Barbara Stark, AT&T
Tim Spets, Greenwave Systems
Jason Walls, QA Cafe

WT-382

Test Plan for 1905.1/1a

Relevant Contributions

Barbara Stark, AT&T
Marcos Martinez, Marvell

 

Marketing Drafts

MD-353

Best Practices for Deploying TR-069 - Whitepaper

Relevant Contributions

Steve Nicolai, Arris
Jason Walls, QA Cafe 

MD-363

Home Network Diagnostics Mechanisms and Best Practices - Whitepaper

Relevant Contributions

Barbara Stark, AT&T 
Miodrag Djurica, KPN

 

Study Documents

SD-279

TR-069 Proxy Management Implementation Guidelines

Relevant Contributions

Tim Spets, Greenwave Systems 
Wenchao Liu, China Telecom
Yu Zhu, Huawei Technologies

SD-323

BBHome Work Items Related to WT-304

Relevant Contributions

Barbara Stark, AT&T 
Tim Carey, Nokia

SD-324

TR-069 Protocol and Transport Separation

Relevant Contributions

William Lupton, Broadband Forum 

SD-333

Intra Customer Premises Network Measurements

Relevant Contributions

Miodrag Djurica, KPN

SD-344

CWMP Root Data Model Transition Mechanisms

Relevant Contributions

Dan-Han Tsai, Broadcom
Jason Walls, QA Cafe 

SD-354

New BBF CWMP Report Tool

Relevant Contributions

William Lupton, Broadband Forum 

SD-375

Applicability of RESTCONF and NETCONF for CPE Management

Relevant Contributions

Olaf Bonness, DT

SD-376

CWMP Data Model/YANG Translation Rules and Tools

Relevant Contributions

William Lupton, Broadband Forum 
Tim Carey, Nokia

SD-398

 Wi-Fi In-Premises Performance Testing

Relevant Contributions

Barbara Stark, AT&T
Tony Zeng, Huawei 

SD-401

 Wi-Fi In-Premises Installation and Diagnostics

Relevant Contributions

Tim Carey, Nokia
Peter Silverman, ASSIA 

 

Internal Documents

ID-069i2

TR-069 Conformance Test Plan Issue 2

Relevant Contributions

Marion Dillon, UNH InterOperability Lab

ID-106

CWMP Data Model Verification Test Plan

Relevant Contributions

Marion Dillon, UNH InterOperability Lab

ID-181

CWMP Interoperability and Functionality Test Plan

Relevant Contributions

Marion Dillon, UNH InterOperability Lab

 

Issues List

IL-069

TR-069 Proposed Changes

Relevant Contributions

John Blackford, ARRIS

IL-104

TR-104 Issues List

Relevant Contributions

Jean-Didier Ott, Orange

IL-106

TR-106 DM and DT Schema Proposed Changes

Relevant Contributions

William Lupton, Broadband Forum 

IL-124

TR-124 Issues List

Relevant Contributions

Jean-Didier Ott, Orange

IL-157

Proposed TR-069 Data Model Objects & Parameters

Relevant Contributions

Timothy Carey, Nokia

IL-181

Device:2 Data Model and TR-181 Issue 2 Proposed Changes

Relevant Contributions

William Lupton, Broadband Forum

 

 Other Documents

OD-148

CWMP Index Page Configuration File

Relevant Contributions

William Lupton, Broadband Forum 

OD-290

BroadbandHome Publication Guidelines

Relevant Contributions

William Lupton, Broadband Forum 

OD-361

Program Requirements for BBF.069 Certification Program

Relevant Contributions

Marion Dillon, UNH InterOperability Lab